The Door and Window Contact Alarm with MPPL Pager Kit is a complete kit comprising of 1 beep and vibrate pager, and 1 door/window transmitter with magnet. It's perfect for keeping track of elderly or infirm people, making sure that they don't wander off alone.
This system is ideal for:
- Care home applications
- Patient movement monitoring
- Dementia wandering
- Hostel monitoring
- Security applications
- Shed security
- Driveway security
- Shop doorway alarm
- 1000s of other applications
- Can be attached with Velcro or screws
This Door And Window Contact Alarm With MPPL Pager Kit is supplied with fixings to attach to a door or window. When the door or window is opened a signal is transmitted to the pager, which will then vibrate and/or alarm.
Up to 8 contact sensors can be added to this system, enabling you to monitor up to 8 doors and/or windows at the same time. This makes the Door and Window Contact Alarm with MPPL Pager Kit a simple and expandable solution that has many possible applications for care, safety and security.
Features of the Alarm Pager
The Multi Purpose Alarm Pager features a built in vibration alarm, which can be selected to work with a choice of high volume tone, low volume tone or vibrate only. The pager will continue to alert for up to 2 weeks until it is acknowledged, and it has a battery life of approximately 12 months depending on the batteries used.
This Alarm Pager is housed in a robust and stylish case making it ideal for a carer to carry around throughout the day. Up to 8 pendants can be used with this alarm pager if required, please select the amount your require from the drop down menu above.
- Powered by 2 x AA batteries
- Dimensions: 80mm x 60mm x 12mm
- Range: 100m
- Weight 120g
The transmitter of the Door And Window Contact Alarm With MPPL Pager Kit is powered by a 9V battery which is included unattached, saving energy.
It has a range of 120 metres and features a low battery warning that is transmitted to the pager. The transmitter's battery will last up to 12 months depending on the battery used.
The LED is illuminated when transmitting a signal and an optional power saving mode can be activated which turns the LED off, adding an additional 6 months to the battery life.
Arrows on the transmitter show where the magnet should be placed, and the magnet itself has a range of 1cm, giving you even more flexibility in placing.
The dimensions of the transmitter are 137mm x 38mm x 22mm.
Can I Use the Door and Window Contact Sensor with My Door?
The Door and Window Contact Sensor features a design that is suitable for most doorways, however for certain doors where there is little room around the frame, it may not be suitable. In these cases, we would recommend using a PIR Motion Detector Kit as an alternative from the same system.